Ap Select Screen - ZyXEL Communications 760559122614 User Manual

Table 26 Network > Wireless LAN > MBSSID
LABEL
Apply
Reset

6.11 AP Select Screen

Use this screen to choose an access point that you want the NBG-418N v2 in universal repeater
mode) to connect to. You should know the security settings of the target AP.
To open this screen, click Network > Wireless LAN > AP Select tab.
Figure 52 Network > Wireless LAN > AP Select
The following table describes the labels in this screen.
Table 27 Network > Wireless LAN > AP Select
LABEL
AP Select
First
Previous
Next
Last
Select
SSID
MAC
Channel
Chapter 6 Wireless LAN
DESCRIPTION
Click Apply to save your changes back to the NBG-418N v2.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Click First button to go to the first page of the AP select table.
Click Previous button to go to the Previous page in the AP select table.
Click Next button to go to the next page in the AP select table.
Click Last button to go to the last page of the AP select table.
Use the radio button to select the wireless device to which you want to connect.
This displays the Service Set IDentity of the wireless device. The SSID is a unique name
that identifies a wireless network. All devices in a wireless network must use the same
SSID.
This displays the MAC address of the wireless device.
This displays the channel number used by this wireless device.
NBG-418N v2 User's Guide
74