ZyXEL Communications NWA-3160 - V3.70 Manual page 255

On an Ethernet switch, create a VLAN that has the same management VLAN ID as
the NWA. The following figure has the NWA connected to port 2 and your
computer connected to port 1. The management VLAN ID is 10.
Figure 141 Management VLAN Configuration Example
Perform the following steps in the switch web configurator:
Click VLAN under Advanced Application.
1
Click Static VLAN.
2
Select the ACTIVE check box.
3
Type a Name for the VLAN ID.
4
Type a VLAN Group ID. This should be the same as the management VLAN ID on
5
the NWA.
Enable Transmitted Packets (Tx) Tagging on the port which you want to
6
connect to the NWA. Disable Tx Tagging on the port you are using to connect to
your computer.
Under Control, select Fixed to set the port as a member of the VLAN.
7
Figure 142 VLAN-Aware Switch - Static VLAN
NWA-3160 Series User's Guide
Chapter 20 VLAN
255