Ap Select Screen - ZyXEL Communications NBG-418N v2 User Manual

The following table describes the labels in this screen.
Table 28 Network > Wireless LAN > MBSSID
L ABEL
Network Profiles
Select
Scheme
SSID
Security
Status
SSID Broadcast
Wireless Settings--Profile 1
Enable Guest
Network
Enable SSID
Broadcast
Allow Guest to
access My Local
Network
Enable Wireless
Isolation
Name (SSID)
Security Options--Profile1
Security Mode
Apply
Reset
6.11 AP Se le c t Sc re e n
Use this screen to choose an access point that you want the NBG-418N v2 in universal repeater mode)
to connect to. You should know the security settings of the target AP.
To open this screen, click
Chapter 6 Wireless LAN
DESC RIPT IO N
Click the Se le c t radio button to select the Multiple Basic Service Set Identifier (MBSSID) you
wish to edit.
This field displays the index number of the SSID.
SSID
This field displays the name of the Wireless client.
This field displays the Se c urity
No ne .
This field displays whether the
This field displays whether the
Click the Ena b le G ue st Ne two rk
Click the Ena b le SSID Bro a dc a st
clients.
Click the Allo w G ue st to a c c e ss m y L o c a l Ne two rk
local network resources behind the NBG-418N v2.
Ena b le Wire le ss Iso la tio n
Click the
communicating with each other through the NBG-418N v2.
SSID
This field displays the name you selected using the select radio button.
Select WEP or WPA- PSK(T KIP)
this wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the Device. When you select to use a security, additional
options appears in this screen.
No ne
Or you can select to allow any client to associate this network without any data
encryption or authentication.
See Section 6.4 on page 63
Apply
Click to save your changes back to the NBG-418N v2.
Re se t
Click to reload the previous configuration for this screen.
Ne two rk > Wire le ss L AN
NBG-418N v2 User's Guide
73
mode of the wireless client. If there's no security, it will display
Ena b le G ue st Ne two rk check box of the SSID is enabled.
Ena b le SSID Bro a dc a st
check box of the SSID is enabled.
check box to enable this SSID.
check box to activate the SSID broadcast to different wireless
check box to allow the client to access the
check box to keep the wireless clients in this SSID from
, WPA2- PSK(AES) or WPA- PSK/ WPA2- PSK AES
for more details about this field.
> AP Se le c t tab.
to add security on