Activate Periodic Rogue Ap Detection - ZyXEL Communications NWA-3160 - V3.70 Manual

Chapter 3 Tutorials

3.4.2 Activate Periodic Rogue AP Detection

Take the following steps to activate rogue AP detection on the first of your NWAs.
In the ROGUE AP > Configuration screen, select Enable from the Rogue AP
1
Period Detection field.
Figure 35 Tutorial: Periodic Rogue AP Detection
In the Period field, enter how often you want the NWA to scan for rogue APs. You
2
can have the NWA scan anywhere from once every ten minutes to once every
hour. In this example, enter "10".
In the Expiration Time field, enter how long an AP's entry can remain in the list
3
before the NWA discards it from the list when the AP is no longer active. In this
example, enter "30".
Click Apply.
4
58
NWA-3160 Series User's Guide