ZyXEL Communications NWA-3160 - V3.70 Manual page 186

Chapter 13 MAC Filter Screen
Table 49 MAC Address Filter
LABEL
Filter Action
Index
MAC Address
Description
Group Settings
Index
MAC Address
Mask
Note
Apply
Reset
Note: If you configure both the MAC Address Filter table and Group Settings table
and a client matches a MAC address specified in both tables, the settings in the
Group Settings is applied by the NWA first.
186
DESCRIPTION
Define the filter action for the list of MAC addresses in the MAC
address filter table.
Select Deny Association to block access to the router. MAC
addresses not listed will be allowed to access the router.
Select Allow Association to permit access to the router. MAC
addresses not listed will be denied access to the router.
This is the index number of the profile.
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the
wireless station to be allowed or denied access to the NWA.
Type a name to identify this wireless station.
This is the index number of the profile.
Specify the MAC address (in XX:XX:XX:XX:XX:XX format) that the
NWA should use to compare with the masked packet.
A MAC address has 6 octets. Specify up to how many octets (from left
to right) the NWA checks for matching a client's MAC Address with
the one you specified in the MAC Address field (above). You can
input a number from 0 to 6.
Enter 0 to accept or deny all clients, depending on the Filter Action
you configured.
Enter 6 to have the NWA check all 6 octets and accept/deny only the
client that matches with the whole MAC address.
Type a short description to identify this group.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
NWA-3160 Series User's Guide