ZyXEL Communications NWA-3160 - V3.70 Manual page 360

Appendix E How to Access and Use the CLI
Copy and Paste Commands
You can copy and paste commands directly from this document into your terminal
emulation console window (such as HyperTerminal). Use right-click (not [CTRL]-
[V]) to paste your command into the console window as shown next.
Using Shortcuts and Getting Help
This table identifies some shortcuts in the CLI, as well as how to get help.
Table 113 CLI Shortcuts and Help
COMMAND / KEY(S)
(up/down arrow keys)
?
help
Use the help command to view the executable commands on the NWA. Follow
these steps to create a list of supported commands:
Log into the CLI.
1
Type help and press [ENTER]. A list comes up which shows all the commands
2
available for this device.
ras> help
alarm chsh
exit ip
sys voip
ras>
360
DESCRIPTION
Scrolls through the list of recently-used commands. You
can edit any command or press [ENTER] to run it again.
Displays the keywords and/or input values that are
allowed in place of the ?.
Displays the (full) commands that are allowed in place of
help.
config
statistics switch
NWA-3160 Series User's Guide