The Ip Screen - ZyXEL Communications NWA-3160 - V3.70 Manual

Nwa-3160 series
Table of Contents

Advertisement

Chapter 14 IP Screen
These parameters should work for the majority of installations.

14.2 The IP Screen

Use this screen to configure the IP address for your NWA. Click IP to display the
following screen.
Figure 107 IP Setup
The following table describes the labels in this screen.
Table 50 IP Setup
LABEL
IP Address Assignment
Get automatically
from DHCP
Use fixed IP address Select this option if your NWA is using a static IP address. When
IP Address
IP Subnet Mask
Gateway IP Address
Apply
Reset
188
DESCRIPTION
Select this option if your NWA is using a dynamically assigned IP
address from a DHCP server each time.
Note: You must know the IP address assigned to the NWA (by
the DHCP server) to access the NWA again.
you select this option, fill in the fields below.
Enter the IP address of your NWA in dotted decimal notation.
Note: If you change the NWA's IP address, you must use the
new IP address if you want to access the web
configurator again.
Type the subnet mask.
Type the IP address of the gateway. The gateway is an immediate
neighbor of your NWA that will forward the packet to the
destination. On the LAN, the gateway must be a router on the
same segment as your NWA; over the WAN, the gateway must be
the IP address of one of the remote nodes.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
NWA-3160 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nwa-3163 - v3.70Nwa-3163Nwa-3166Nwa-3160

Table of Contents