ZyXEL Communications NWA-3160 - V3.70 Manual page 108

Chapter 6 AP Controller Mode
Table 17 Radio Edit Screen
LABEL
MCS Table
Select SSID Profile
Enable Antenna
Diversity
Apply
Reset
108
DESCRIPTION
The MCS Rate table is available only when 802.11n/g or
802.11n/a is selected as the 802.11 Radio Mode.
IEEE 802.11n supports many different data rates which are called
MCS rates. MCS stands for Modulation and Coding Scheme. This
is an 802.11n feature that increases the wireless network
performance in terms of throughput.
For each MCS Rate (0-15), select either Enable (default) to have
the NWA use the data rate. Select Disable if you do not want the
NWA to use the data rate.
Use this section to choose the SSID profile or profiles you want
access points using this radio profile to use. Each AP can use
multiple SSID profiles simultaneously.
Configure SSID profiles in the Profile Edit > SSID screens.
(For NWA-3160 and NWA-3163)
Select this to use antenna diversity. Antenna diversity uses
multiple antennas to reduce signal interference.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
NWA-3160 Series User's Guide