Assigning A Name - Roland Fantom XR Owner's Manual

Assigning a Name

On the Fantom-XR, you can assign names to each patch, rhythm set,
performance, and Sample. The procedure is the same for any type of
data.
1.
Press or to move the cursor to the location where
you wish to input a character.
fig.04-022a
2.
Turn the VALUE dial, or use [INC][DEC] to specify the
character.
• Press [SHIFT] so it lights, and then press [DEC].
Deletes the character at the cursor location, and moves the
subsequent characters one space forward.
• Press [SHIFT] so it lights, and then press [DEC].
Inserts a space at the cursor location.
• or
Move the cursor.
• ,
Switch between uppercase and lowercase letters.
* If you decide to discard your input, press [EXIT].
Available characters/symbols are:
space, A–Z, a–z, 0–9, ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^
_ ` { | }
Using keywords to input a name
You can also select and input individual words (keywords)
frequently used in a patch name. For example, this is a quick way to
input names of instruments such as "Piano" or "Guitar," or related
terms such as "Control" or "Dance."
1.
In the screen of step 1, move the cursor to the location at
which you want to input the keyword.
2.
Press the VALUE dial.
The indication "KEYWORD" will appear at the bottom of the
screen.
3.
Turn the VALUE dial to select a keyword.
4.
Press [ENTER].
The keyword will be input at the cursor location.
Overview of the Fantom-XR
39