Pan Keyfollow - Roland Fantom XR Owner's Manual

Bias
Bias causes the volume to be affected by the keyboard position.
This is useful for changing volume through keyboard position
(pitch) when playing acoustic instruments.
fig.06-039.e
LOWER
+
Level
0
–
C-1 Bias Position
LO&UP
+ +
Level
0 0
– –
Bias Position
C-1
Bias Level
Adjusts the angle of the volume change that will occur in the
selected Bias Direction. Larger settings will produce greater change.
Negative (-) values will invert the change direction.
Value: -100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0, +10, +20,
+30, +40, +50, +60, +70, +80, +90, +100
Bias Position
Specifies the key relative to which the volume will be modified.
Value: C-1–G9
Bias Direction
Selects the direction in which change will occur starting from the
Bias Position.
Value
LOWER: The volume will be modified for the keyboard area
below the Bias Point.
UPPER: The volume will be modified for the keyboard area
above the Bias Point.
LO&UP: The volume will be modified symmetrically toward the
left and right of the Bias Point.
ALL: The volume changes linearly with the bias point at the
center.
Tone Pan ★
Sets the pan of the tone. "L64" is far left, "0" is center, and "63R" is
far right.
L64–0–63R
Value:
UPPER
+
Level
0
Key –
G9 C-1 Bias Position
ALL
+
Level
–
0 0
Key –
+
Bias Position
G9 C-1

Pan Keyfollow

Use this parameter if you want key position to affect panning.
Positive (+) settings will cause notes higher than C4 key (center C) to
be panned increasingly further toward the right, and negative (-)
settings will cause notes higher than C4 key (center C) to be panned
toward the left. Larger settings will produce greater change.
-100– +100
Value:
fig.06-040.e
Pan
R
Key
G9
o
Key
L
G9
C1 C2
Random Pan Depth
Use this parameter when you want the stereo location to change
randomly each time you press a key. Higher settings will produce a
greater amount of change.
Value: 0–63
Alternate Pan Depth
This setting causes panning to be alternated between left and right
each time a key is pressed. Higher settings will produce a greater
amount of change. "L" or "R" settings will reverse the order in
which the pan will alternate between left and right. For example if
two tones are set to "L" and "R" respectively, the panning of the two
tones will alternate each time they are played.
Value: L63–0–63R
When any value from Type "2"–"10" is selected for the
Structure parameter in the Pan KF, Rnd Pan Depth, Alter Pan
Depth parameter settings, the output of tones 1 and 2 are joined
in tone 2, and the output of tones 3 and 4 are joined in tone 4.
For this reason, tone 1 will follow the settings of tone 2, and
tone 3 will follow the settings of tone 4 (p. 51).
Patch TVA Env
A-Env T1 V-Sens
(TVA Envelope Time 1 Velocity Sensitivity)
This allows keyboard dynamics to affect the Time 1 of the TVA
envelope. If you want Time 1 to be speeded up for strongly played
notes, set this parameter to a positive (+) value. If you want it to be
slowed down, set this to a negative (-) value.
Value: -63– +63
Creating a Patch
C3 C4 C5 C6 C7
+100
+50
0
-50
-100
Key
61