Roland Fantom XR Owner's Manual page 212

Effects List
Parameter Value
Cho Balance # D100:0W–D0:100W
Level 0–127
67: OD → FLANGER
(OVERDRIVE → FLANGER)
fig.MFX-67
L in
Overdrive
R in
Parameter Value
Od Drive # 0–127
Od Pan # L64–63R
Fln Pre Delay 0.0–100.0 ms
Fln Rate # 0.05–10.00 Hz, note
Fln Depth 0–127
Fln Feedback # -98– +98 %
Fln Balance # D100:0W–D0:100W
Level 0–127
68: OD → DELAY
(OVERDRIVE → DELAY)
fig.MFX-68
L in
Overdrive
R in
Parameter Value
Od Drive # 0–127
Od Pan # L64–63R
Delay Time 0–2600 ms, note
Delay -98– +98 %
Feedback #
Delay HF Damp 200–8000 Hz,
BYPASS
212
Description
Adjusts the volume balance be-
tween the sound that is sent
through the chorus (W) and the
sound that is not sent through the
chorus (D).
Output Level
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the volume balance be-
tween the sound that is sent
through the flanger (W) and the
sound that is not sent through the
flanger (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Parameter Value
Delay Balance # D100:0W–D0:100W
Level 0–127
69: DST → CHORUS
(DISTORTION → CHORUS)
The parameters are essentially the same as in "66: OD
with the exception of the following two.
→
OD Drive Dst Drive, OD Pan
fig.MFX-69
L in
Distortion
R in
70: DST → FLANGER
(DISTORTION → FLANGER)
The parameters are essentially the same as in "67: OD
FLANGER," with the exception of the following two.
→
OD Drive Dst Drive, OD Pan
fig.MFX-70
L in
Distortion
R in
71: DST → DELAY
(DISTORTION → DELAY)
The parameters are essentially the same as in "68: OD
with the exception of the following two.
→
OD Drive Dst Drive, OD Pan
fig.MFX-71
L in
Distortion
R in
Description
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
→
CHORUS,"
→
Dst Pan
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
→
→
Dst Pan
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
→
DELAY,"
→
Dst Pan
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D