System Exclusive Messages - Roland Fantom XR Owner's Manual

❍Data set 1
DT1 (12H)
Status Data byte
F0H 41H, dev, 00H, 6BH, 12H, aaH, bbH,
ccH, ddH, eeH, ... ffH, sum
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: 00H - 1FH, 7FH)
00H Model ID #1 (Fantom-XR)
6BH Model ID #2 (Fantom-XR)
12H Command ID (DT1)
aaH Address MSB: upper byte of the starting address of the data to be
sent
bbH Address: upper middle byte of the starting address of the data
to be sent
ccH Address: lower middle byte of the starting address of the data
to be sent
ddH Address LSB: lower byte of the starting address of the data to be
sent.
eeH Data: the actual data to be sent. Multiple bytes of data are
transmitted in order starting from the address.
: :
ffH Data
sum Checksum
F7H EOX (End Of Exclusive)
* The amount of data that can be transmitted at one time depends on the type of data, and
data will be transmitted from the specified starting address and size. Refer to the address
and size given in Parameter Address Map (p. 252).
* Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each
packet will be sent at an interval of about 20 ms.
* Regarding the checksum, please refer to (p. 269)
* Not received when the Receive Exclusive parameter (SYSTEM/MIDI) is OFF.
Status Data byte
F0H 41H, dev, 42H, 12H, aaH, bbH, ccH,
ddH, ... eeH, sum
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: 10H - 1FH, 7FH)
42H Model ID (GS)
12H Command ID (DT1)
aaH Address MSB: upper byte of the starting address of the transmitted
data
bbH Address: middle byte of the starting address of the transmitted
data
ccH Address LSB: lower byte of the starting address of the transmitted
data
ddH Data: the actual data to be transmitted. Multiple bytes of
data are transmitted starting from the address.
: :
eeH Data
sum Checksum
F7H EOX (End Of Exclusive)
* The amount of data that can be transmitted at one time depends on the type of data, and
data will be transmitted from the specified starting address and size. Refer to the address
and size given in Parameter Address Map (p. 252).
* Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each
packet will be sent at an interval of about 20 ms.
* Regarding the checksum, please refer to (p. 269)
* Not received when the Receive Exclusive parameter (SYSTEM/MIDI) is OFF.
2. Data Transmission
Status
F7H
■Channel Voice Messages
The following messages are transmitted when using the Arpeggio, the Chord Memory
function, or the Rhythm function.
* This message is not sent when Tx Note parameter (SYSTEM/MIDI) is OFF.
●Note off
Status
8nH
n = MIDI channel number:
kk = note number:
vv = note off velocity:
●Note on
Status
9nH
n = MIDI channel number:
kk = note number:
vv = note on velocity:

■System Exclusive Messages

Universal Non-realtime System Exclusive Message" and Data Set 1 (DT1) are the only
System Exclusive messages transmitted by the Fantom-XR
●Universal Non-realtime System Exclusive Message
●Identity Reply Message (Fantom-XR)
Receiving Identity Request Message, the Fantom-XR send this message.
Status
Status
F7H
F0H
Byte
F0H
7EH
dev
06H
02H
41H
6BH 01H
00H 01H
03H 00H 00H 00H
F7H
MIDI Implementation
2nd byte 3rd byte
kkH vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
2nd byte 3rd byte
kkH vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
Data byte
7EH, dev, 06H, 02H, 41H, 6BH, 01H,
00H, 01H, 03H, 00H, 00H, 00H
Explanation
Exclusive status
ID number (Universal Non-realtime Message)
Device ID (dev: 10H - 1FH)
Sub ID#1 (General Information)
Sub ID#2 (Identity Reply)
ID number (Roland)
Device family code
Device family number code
Software revision level
EOX (End of Exclusive)
Status
F7H
251