Roland Fantom XR Owner's Manual page 213

72: ENH → CHORUS
(ENHANCER → CHORUS)
fig.MFX-72
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enh Sens # 0–127
Enh Mix # 0–127
Cho Pre Delay 0.0–100.0 ms
Cho Rate # 0.05–10.00 Hz, note
Cho Depth 0–127
Cho Balance # D100:0W–D0:100W
Level 0–127
73: ENHANCER → FLANGER
(ENH → FLANGER)
fig.MFX-73
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enh Sens # 0–127
Enh Mix # 0–127
Fln Pre Delay 0.0–100.0 ms
Fln Rate # 0.05–10.00 Hz, note
Fln Depth 0–127
Fln Feedback # -98– +98 %
Fln Balance # D100:0W–D0:100W
Level 0–127
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
74: ENH → DELAY
(ENHANCER → DELAY)
fig.MFX-74
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enh Sens # 0–127
Enh Mix # 0–127
Delay Time 0–2600 ms, note
Delay -98– +98 %
Feedback #
Delay HF Damp 200–8000 Hz,
BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127
75: CHORUS → DELAY
fig.MFX-75
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Pre Delay 0.0–100.0 ms
Cho Rate # 0.05–10.00 Hz, note
Cho Depth 0–127
Cho Balance # D100:0W–D0:100W
Delay Time 0–2600 ms, note
Delay -98– +98 %
Feedback #
Delay HF Damp 200–8000 Hz,
BYPASS
Delay D100:0W–D0:100W
Balance #
Level 0–127
Effects List
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generat-
ed by the enhancer
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Volume balance between the di-
rect sound (D) and the chorus
sound (W)
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Adjusts the proportion of the de-
lay sound that is fed back into the
effect. Negative (-) settings will in-
vert the phase.
Adjusts the frequency above
which sound fed back to the effect
will be cut. If you do not want to
cut the high frequencies, set this
parameter to BYPASS.
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Output Level
213