Using A Memory Card; Before Using The Memory Card; Writing Data To The Card; Installing The Pc Card Protector - Roland Fantom XR Owner's Manual

128-voice synthesizer/sampler module
Hide thumbs Also See for Fantom XR:
Table of Contents

Advertisement

Using a Memory Card

The Fantom-XR features a PC card slot, allowing you to use not only
PC card type memory cards, but also other types of media, such as
CompactFlash and SmartMedia, via the appropriate PC card
adaptor.
Before Using the Memory
Card
Make sure that the correct side of the card is facing upward, and
insert it into the Fantom-XR's PC card slot. When you need to
remove the card, press the eject button located beside the card.
fig.31a-001
memory
card

Writing data to the card

Patches, rhythm sets, performances, and samples can be written to
the card. For details on the writing procedure, refer to the
explanation for the corresponding parameters.
174
Eject

Installing the PC Card Protector

The Fantom-XR provides a PC card protector to prevent theft of the
memory card. To install the PC card protector, use the following
procedure.
1.
Insert the memory card into the PC CARD card slot.
2.
Use the attached screws to fasten the PC card protector as
shown below.
fig.31a-002

Advertisement

Table of Contents
loading

Table of Contents