Low/Mid/High Attack
Time from when the volume goes up the threshold level until the
compressor effect applies
Value: 0–100 ms
Low/Mid/High Release
Time from when the volume falls below the threshold level until the
compressor effect no longer applies
Value: 50–5000 ms
Low/Mid/High Threshold
Volume level at which compression begins
Value: -36–0 dB
Low/Mid/High Ratio
Compression ratio
Value: 1.00:1–INF:1 (INF: infinity)
Low/Mid/High Level
Output volume
Value: 0–24 dB
About THRESHOLD and RATIO
As shown in the diagram below, these parameters determine
how the volume is to be compressed.
fig.22-014.e
THRESHOLD
Input Level
In the Mastering screen, you can press [MENU] to execute the
following menu items.
Preset [Hard Comp]
Recall preset settings for each type.
Preset [Soft Comp]
Preset [Lo Boost]
Preset [Mid Boost]
Preset [Hi Boost]
User
Recall saved user settings.
1:1
RATIO
2:1
4:1
INF:1
Saving the Mastering settings
Save the current settings as user settings. Only one set of user
settings can be saved.
1.
In the Mastering screen, press [SHIFT] so it lights, and then
press
.
Adding Effects
147