Assigning A Name - Roland XP-30 Owner's Manual

Chapter 1. Overview of the XP-30

Assigning a Name

The XP-30 lets you assign names to Patches, Performances, and
Rhythm Sets. The procedure is the same for any type of data.
To assign a name, use [ ]/[
location where you wish to input a character. Then use the
VALUE dial or [INC]/[DEC] or the Numeric Keys to input a
character.
Available characters/symbols:
space, A—Z, a—z, 0—9, + - * / | = ! ? < > ( ) [ ] : ; . , " ' ` # %
& $ ¥ @ ^ _
Using the Numeric Keys
The numeric keys are used to input the numerals printed on
each key as well as the characters assigned to each key (see
the table below). Each time you press a numeric key, the
display will cycle through the numeral and characters
printed above the key. To specify a lowercase character, hold
down [SHIFT] as you press the numeric key.
Numeric Key Character
[1] A B C
[2] D E F
[3] G H I
[4] J K L
[5] M N O
[6] P Q R
[7] S T U
[8] V W X
[9] Y Z !
[0] space
Convenient Functions
While you are holding down [SHIFT], the screen will show
three functions that are convenient when entering a name. To
use each function, hold down [SHIFT] and press the
appropriate function button.
fig.1-17
A a: switch between uppercase/lowercase characters
INS: insert a space at the cursor location
DEL: delete the character at the cursor location
46
] to move the cursor to the