Filter Type; Equalizer; Mid-Side Eq (Mid-Side Equalizer) - Roland SH-4d Owner's Manual

Filter Type

Equalizer

This is a four-band stereo equalizer (low, mid x 2, high).
Parameter
Low Freq 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz]
-15–+15 [dB]
Low Gain
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
Mid1 Freq
4000, 5000, 6300, 8000 [Hz]
Mid1 Gain -15–+15 [dB]
0.5, 1.0, 2.0, 4.0, 8.0
Mid1 Q
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150,
Mid2 Freq
4000, 5000, 6300, 8000 [Hz]
Mid2 Gain -15–+15 [dB]
0.5, 1.0, 2.0, 4.0, 8.0
Mid2 Q
HighFreq 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz]
-15–+15 [dB]
High Gain
Level 0–127

Mid-Side EQ (Mid-Side Equalizer)

This effect allows the left/right signals that have similar phase to be tonally adjusted in a different way than the left/right signals
that have different phase.
Parameter
M EQ OFF, ON
Switch
-12.00–+12.00 [dB]
M In G
20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250,
M Low F
315, 400 [Hz]
M Low G -12.00–+12.00 [dB]
Value
Value
Frequency of the low range
Amount of boost/cut for the low-frequency
range
Frequency of the middle range 1
Gain of the middle range 1
Width of the middle range 1
Set a higher value for Q to narrow the range
to be affected.
Frequency of the middle range 2
Gain of the middle range 2
Width of the middle range 2
Set a higher value for Q to narrow the range
to be affected.
Frequency of the high range
Amount of boost/cut for the high-frequency
range
Output Level
Explanation
Switches whether to apply tonal adjustment to left/right
input signals whose phase is similar (in phase).
Volume of left/right input signals whose phase is similar (in
phase)
Frequency of the low range
Amount of boost/cut for the low-frequency range
MFX Parameters
Explanation
91