Writing Data - Kyocera Mita FS-1900N Operation Manual

Operating the Storage Device

Writing Data

You can write data to a CompactFlash card, the Microdrive, or the RAM
disk using the operator panel. When writing data to the storage device, a
name is automatically assigned to the data. The CompactFlash card or the
Microdrive or the RAM disk must be formatted. Otherwise, the >Write
Data message explained below will not appear on the display. To format a
CompactFlash card or the Microdrive or the RAM disk, see
Storage Device
You can format the Microdrive or the RAM disk using the operator panel
when the first time you installed a new Microdrive or the RAM disk. About
formatting a new Microdrive.
Note
After writing is complete, you can print a list of data stored in the storage
device for confirmation. See
1-89.
To write data to a CompactFlash card, the Microdrive or the RAM disk,
proceed as follows:
1
Press the MENU key.
2
Press the
> or RAM Disk Mode > appears.
Memory Card
3
Press the > key.
4
Press the
>Write Data
5
Press the ENTER key. A question mark (?) appears.
>Write Data ?
6
Press the ENTER key. Processing appears, then Waiting.
on page 1-88.
Printing a List of Data Names
or key repeatedly until Memory Card >, Hard Disk
>
or key repeatedly until >Write Data appears.
1-84
Formatting a
on page