Kyocera Mita FS-1900N Operation Manual page 254

3
Click the Page Insert check box.
3
4
Enter the page numbers before which you want to insert a page in
the Insert Before Page box. The page number range you can specify
is from 2 to 255. If you want to specify more than one page numbers,
separate them with commas. To specify a range of pages, use a
hyphen between the starting and ending numbers in the range. For
example, to insert separators before pages 5, 11, 12, 13, and 18, type
"5, 11-13, 18."
5
Select the Print on to Front check box to print on the separators.
Note that the Print onto Back is not applicable for model FS-1900.
If you check this check box on, each separator sheet is printed with
data reflecting its position in the entire print job. For example, the
separator between pages 9 and 10 will be printed as page 10 when
you select this check box.
6
Select the paper source for the separators from the Media for Page
drop down list. Note that thick paper, colored paper, etc., should be
loaded on the MP tray.
7
Click the OK button. The Media tab is displayed again.
8
Click the OK button to return to the Print dialog box.
9
Load the paper you want to use for the separator(s) onto the paper
source specified in step 6.
10
Click the OK button to start printing.
Printing from Windows Applications
3-9
5
4
6