Storing A Print Job - Kyocera Mita FS-1900N Operation Manual

Storing a Print Job

The procedure below allows you to store print jobs to the Microdrive that
are frequently needed such as fax cover pages, check lists, and order forms,
for printing at any later time using the operator panel.
The print jobs will not be deleted when the printer is turned off.
Releasing a Stored Job
To print a stored job through the operator panel:
1
Press the MENU key.
2
Press the or
e-MPS
3
Press the > key.
4
Press the or
The name entered in the printer driver (Harold, in this example)
also appears.
>Private/Stored
Harold
5
Press the ENTER key. A blinking question mark (?) before a user
name appears.
>Private/Stored
?Harold
6
Press the or
example).
>Private/Stored
?Arlen
7
Press the ENTER key. The user name and the job name (Agenda, in
this example) entered in the printer driver appear with a blinking
question mark (?).
>Arlen
?Agenda
key repeatedly until e-MPS > appears.
>
key repeatedly until >Private/Stored appears.
key to display the desired user name (Arlen, in this
1-63
e-MPS