Kyocera Mita FS-1900N Operation Manual page 40

Paper Handling
4
Press the or
If option paper feeders are added, Cassette 1 Size will appear for
the standard paper cassette and Cassette 2 Size, Cassette 3
Size, and Cassette 4 Size will appear for the option paper
feeders.
>Cassette Size >
Set the unit of measurement as described in the next section.
Selecting the Unit of Measurement
Then, use the following procedure to set the unit of measurement.
1
Press the > key.
2
Press the or
measurement can be selected between millimeters and inches. The
current unit of measurement is displayed (the default setting is mm).
>>Unit
mm
3
Press the ENTER key. A blinking question mark (?) appears.
>>Unit
? mm
4
Select mm or inch using the
5
Press the ENTER key.
Set the dimensions of paper as described in the next section.
key repeatedly until >Cassette Size > appears.
key repeatedly until >>Unit appears. The unit of
or
1-26
key.