Sorter Modes - Kyocera Mita FS-1900N Operation Manual

Sorter modes

Sorter Mode
Collate mode
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Group mode
200 Copies
of page 1
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
200 Copies
of page 4
Mailbox mode 1 to 5
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
5
Click the OK button in the Properties dialog box. The Print dialog
box is displayed again. Click the OK button to start printing.
Printing from Windows Applications
Description
The collate mode delivers the output pages by copy as
shown in the example. This mode is useful when you
need several independent copies of a document.
The maximum number of copies is 5. If a tray becomes
full (approximately 200 pages), the printer pauses and
indicates the
Option tray # paper full
message. Then, you will need to remove all the printed
pages from the tray indicated by
In the example, three copies of a document of 200 pages
long are made, and each copy is stacked in trays 1, 2,
and 3, respectively.
The group mode delivers the output pages by page as
shown in the example. When multiple copies of a file
are printed, all copies of a single page are delivered
together to a single tray.
The maximum number of copies is 200. If a tray
becomes full (200 pages), the printer pauses and
indicates the
Option tray # paper full
message. Then, you will need to remove all the printed
pages from the tray indicated by
In the example, we make 200-copy stacks of each page
of an 4-page long document.
The mailbox mode delivers the printed pages to the
tray you specify on the printer driver.
When the sorter tray becomes full, the printer indicates
the Option tray # paper full message and pauses
until you remove all the pages in the sorter tray
indicated by # in the message.
In the example, sorter tray 5 is specified to receive the
printed pages.
3-23
in the message.
#
in the message.
#