Kyocera Mita FS-1900N Operation Manual page 48

Paper Handling
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be
customized.
1
Display the custom paper type (see
1-32) and press the > key.
2
Press the or
>>Paper Weight
Normal
3
Press the ENTER key. A blinking question mark (?) appears.
>>Paper Weight
? Normal
4
Press the or
display changes as shown below. For details of the default setting for
each paper type, see
Normal
Heavy (Thick)
Light (Thin)
5
When the desired paper thickness displayed, press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
If the paper type is set to Custom and the option duplexer is installed
on the printer, duplex printing can be enabled and disabled. See
Setting the Duplex Path
key repeatedly until >>Paper Weight appears.
key to display the desired paper thickness. The
Paper Type on page 2-11.
on the following page.
1-34
Custom Paper Type on page