Kyocera Mita FS-1900N Operation Manual page 59

6
Press the > key. The message display changes to that show below.
>> I000
The letter before the number indicates the type of font as shown
below:
Letter Description
Internal font
I
Soft (down load) font
S
Fonts in an option CompactFlash card
M
Fonts in a RAM disk or option Microdrive.
H
Fonts in an option ROM
O
7
Press the ENTER key. A blinking question mark (?) appears.
>>?I000
8
Press the or
appears. For font numbers of the internal fonts, see
page A-2.
9
When the desired font is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
key repeatedly until the desired font number
1-45
Pagination
List of Fonts on