Kyocera Mita FS-1900N Operation Manual page 76

e-MPS
8
Press the or
9
Press the ENTER key. The ID input line appears. Enter the four-digit
access code entered in the printer driver and press the ENTER key.
To enter the ID, press the < or > key to move the cursor to the
number to be changed and then enter the correct number by pressing
the or key.
>Agenda
ID
10
You can set the number of copies to be printed. To increase the copy
count, press the
>Agenda
Copies
11
Press the ENTER key to finalize the copy count. The printer prints
the specified number of copies for the job.
Deleting a Private Job
To delete a stored private job, proceed as follows:
1
Follow steps 1 through 8 in the above section.
2
When the title of the job to be printed is displayed (Agenda, in this
example), press the ENTER key. Enter the four-digit access code
entered in the printer driver and press the ENTER key.
>Agenda
Copies
3
Press the key repeatedly until Delete appears for the number of
copies.
>Agenda
Delete
4
Press the ENTER key. The private job is deleted from the Microdrive.
key to display the desired job title.
0000
key; to decrease the copy count, press the
001
001
_
1-62
key.