Output Stack - Kyocera Mita FS-1900N Operation Manual

Output Stack

The following procedure allows you to select whether printouts will be
received by the face-down output tray or to the face-up output tray. If an
option sorter is installed, it can also be selected using the manner
described below.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
4
Press the or
>Stack Select
Face-down tray
5
Press the ENTER key. A blinking question mark (?) appears.
>Stack Select
? Face-down tray
6
Press the or
tray changes as shown below.
Face-down tray (Printer's face-down output tray) [Default]
Face-up tray
7
When the desired paper source displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Paper Handling > appears.
key repeatedly until >Stack Select appears.
key to display the desired destination. The output
(Printer's face-up output tray) [Option face-up
tray required]
1-39
Paper Handling