Setting The Paper Size In Mp Tray - Kyocera Mita FS-1900N Operation Manual

Paper Handling

Setting the Paper Size in MP Tray

7
Press the MENU key. The message display returns to Ready.
To print using the custom size set above, define the same custom size
on the printer driver. For details, see
Printer Driver
When using the MP tray in the cassette mode, you should set the same
paper size to the MP tray as that is used to format the job to print. The
factory default setting is A4 or Letter.
This menu does not appears when the option envelope feeder is installed on
the printer.
For more details about the paper sizes that can be fed from the MP tray, see
Chapter 2.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
4
Press the or
>MP Tray Size
A4
5
Press the ENTER key. A blinking question mark (?) appears.
>MP Tray Size
? A4
Guide.
key repeatedly until Paper Handling > appears.
key repeatedly until >MP Tray Size appears.
1-28
Setting Custom Paper Size in