Font; Default Font - Kyocera Mita FS-1900N Operation Manual

Pagination

Font

Default font

8
Select On using the
>Print KPDL Errs
? On
9
Press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
You can select the default font for the current interface. In addition to the
internal fonts, all fonts that are downloaded to the printer memory, or fonts
stored on a CompactFlash card, Microdrive, or option ROM, can be selected
as the default font.
In this menu, you can also set the type and pitch for Courier and Letter
Gothic.
1
Press the MENU key.
2
Press the or
Font
3
Press the > key.
4
Press the or
>Font Select
Internal
5
To select an internal font, check that Internal is displayed. If
Internal is not displayed, press the ENTER key. Press the
key repeatedly until the message display indicates Internal and
press the ENTER key.
To select an option font, press the ENTER key. Press the
repeatedly until the message display indicates Option and press the
ENTER key. This operation is possible only when option fonts are
installed in the printer.
or key.
key repeatedly until Font > appears.
>
key repeatedly until >Font Select > appears.
>
1-44
or
or key