Printing Method - Kyocera Mita FS-1900N Operation Manual

Specifications
Specifications
Item

Printing method

Printing speed
Resolution
First print
Warm-up time
Controller
Main memory
Interfaces
Memory card slot
Hard disk slot
Self test
Maximum duty cycle
Drum
Developer
Main charger
Transferring
Separation
Drum cleaning
Drum discharging
Fuser
Toner saving
Paper
Paper feed trays
Capacity of output trays
Ambient conditions
Electrophotography, laser scan
18 pages/minute (A4 size) when printing multiple copies of the same page
Fast 1200 mode with KIR [Kyocera Image Refinement]
600 dpi with KIR (Kyocera Image Refinement)
300 dpi with KIR (Kyocera Image Refinement)
Approx. 19 seconds or less (A4 size), depending on input data
Approx. 9 seconds or less (from sleep mode)
Approx. 16 seconds or less (from power on)
at 23 °C, 120 or 230 V
PowerPC 405 (200 MHz)
16 MB, expandable up to 144 MB
Parallel: IEEE1284, 1
USB: Revision 1.1, 1
Option: Serial interface/Network interface card, 1
1 (CompactFlash card)
1 (Microdrive)
Performed at power-up
65,000 pages/month
Amorphous silicon drum
Mono-component dry developer
Positive scorotron charger
Negative charger roller
Curvature separation
Blade cleaner
Illumination by eraser LED array
Heat roller and pressure roller
Ecoprint mode
Chapter
Plain paper (See
Cassette: A5 to A4/Letter universal cassette 148 to 216 mm × 210 to 297 mm.
Holds 500 sheets of thickness 0.11 mm
For U. S. A.: A5 to A4/Letter and Legal universal cassette 5-13/16 to
8-1/2" × 8-1/4 to 14"
MP tray: 70 to 216 mm (2-3/4 to 8-1/2") × 148 to 297 mm (5-13/16 to 11-11/16")
(see page 2-4). Holds 100 sheets of thickness 0.11 mm
Face-down tray  250 sheets of thickness 0.11 mm
Face-up output tray (Option)  PT-4: 250 sheets of thickness 0.11 mm
Temperature: 10 to 32.5 °C (50 to 90.5 °F)
Humidity: 20 to 80 % RH
Optimum conditions: 23 °C (73.4 °F), 60 % RH
Altitude: Max. 2,000 m (6,500 feet)
Illumination: Max. 1,500 lux
D-2
Description
2)
PT-60: 100 sheets of thickness 0.11 mm