Keys - Kyocera Mita FS-1900N Operation Manual

Keys

Key
• Switches the printer on-line and off-line.
• Prints and feed out one page.
• Cancels specific errors.
GO
• Cancels a printing job.
CANCEL
• Resets numeric values, or cancels a setting procedure.
• Used to stop the sounding of the alarm buzzer an error occurs.
• When pressed during mode selection, terminates the setting and the printer returns to the
• Used to select the emulation, font, character code set; to read an CompactFlash card, and
MENU
Used to access a desired item or enter numeric values. In some of the control procedures, the >
and < keys are used to enter or exit a sub item.
Used to access a desired item or enter of numeric values. In some of the control procedures, the
> and < keys are used to enter or exit a sub item.
Used as the < key in the mode selection function.
• Used as the > key in the mode selection function.
• Displays online help messages on the message display when paper jam errors occur. When
?
Finalizes numeric values and other selections.
ENTER
The operator panel keys are used to
configure the printer. Note the
certain keys have the secondary
function.
Settings made with these keys effect only the interface currently in use.
Note
To cancel, proceed as follows:
1 Check if
Processing
2 Press the CANCEL key.
3 appears in the message display and then interface to be canceled.
Print Cancel?
Parallel
USB
(appears only when an option serial interface board kit is installed)
Serial
(appears only when an option network interface card is installed)
Option
CANCEL
Press the key again if you wish to stop the cancellation of printing.
4 Select the interface to cancel using
from the selected interface will stop.
and printing stops after the current page is printed.
Ready condition.
more.
pressed in the condition, displays explanations of online help messages. When pressed
Ready
while the online help is displayed, cancels the online help.
Function
is displayed in the message display.
t
he or key and then press the
Cancelling data
1-5
Understanding the Operator Panel
GO
CANCEL MENU
ENTER
key. Printing
appears in the message display
?
ENTER