Printing A List Of Data Names - Kyocera Mita FS-1900N Operation Manual

Printing a List of Data Names

When the formatting is successfully completed, the printer automatically
prints out a format information page as shown below.
FORMAT INFORMATION
Capacity. The total size of the CompactFlash card or the Microdrive memory.
Used Space. The size the printer uses for its system.
Free Space. The size remaining in the CompactFlash card or the Microdrive for storing
data.
When the format information is printed, the message display returns to
Ready.
The printer prints a list of all data names (referred to as partitions) stored
in the storage device for reference. (Printing a list is also available for a
font card.)
To print a list of data names for the CompactFlash card, the Microdrive, or
the RAM disk proceed as follows.
1
Press the MENU key.
2
Press the or
>, or RAM Disk Mode > appears.
Memory Card
3
Press the > key.
4
Press the or
appears.
>List of
Partitions
FS-1900 Page Printer
key repeatedly until Memory Card >, Hard Disk
>
key repeatedly until >List of Partitions
1-89
Operating the Storage Device