Using The Sorter (So-60) - Kyocera Mita FS-1900N Operation Manual

Using the Sorter (SO-60)

4
To set the width of the gutter, click the Gutter Settings button and
enter the desired value in the Gutter field. The width of the gutter
ranges from 5.00 to 25.4 mm or from 0.20 to 1.00 inch.
5
Click the OK button.
To change the default setting to duplex printing, make this setting
from Windows.
6
The Print dialog box is displayed again. Click the OK button to start
printing.
When outputting to the sorter, you can select one of the collate mode, group
mode, and mailbox mode. For the function of each mode, see
on page 3-23.
1
Display the printer driver's Properties dialog box from the
application software.
2
Click the Output tab.
3
Select Mailbox [Face-down] as Output to drop down list. To
understand sorter modes, see page 3-23.
Printing from Windows Applications
3-21
Sorter modes