Received Data Dump - Kyocera Mita WP31C Operation Manual

3.13 Other Modes

3.13.4 Received Data Dump

You can print data received by the printer as hexadecimal code for debugging programs and
files.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Others
3 3 3 3
Press the key.
4 4 4 4
Press the or
>Print HEX-DUMP
5 5 5 5
Press the ENTER key. A question mark (?) appears.
>Print HEX-DUMP?
6 6 6 6
Press the ENTER key again. The message Processing appears for a second,
followed by Waiting.
Processing
Waiting
7 7 7 7
While the message display is indicating Waiting (for 30 seconds by default), send
data to be hex-dumped to the printer. The message display indicates Processing
while the data is being received.
You can cancel printing of any more dump data by pressing the GO key and then the
CANCEL key.
8 8 8 8
Once all data has been received, the message Waiting will appear. Press the GO
key to finish hex-dump printing.
key repeatedly until Others > appears.
>
key repeatedly until > Print HEX-DUMP appears.
3-92