Memory/Call Channels; I General Description; I Selecting A Memory Channel - Icom IC-91A Instruction Manual

8

MEMORY/CALL CHANNELS

I General description

The IC-91A/91AD has 850 memory channels in A band, 450
memory channels in B band, and 2 call channels in each
bands. Memory channels in each bands including 50 scan
edge memory channels (25 pairs) for storage of often-used
frequencies, respectively.
And a total of 26 memory banks, A to Z, are available in each
bands for storing groups of frequencies, etc. Up to 100 chan-
nels can be assigned into a bank.
D D Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency (p. ??)
• Operating mode (p. ??)
• Duplex direction (+DUP or –DUP) with an offset fre-
quency (pgs. ??, ??)
• Subaudible tone encoder (p. ??), tone squelch or DTCS
squelch ON/OFF (p. ??)
• Subaudible tone frequency (p. ??), tone squelch fre-
quency or DTCS code with polarity (pgs. ??, ??)
• Scan skip information (p. ??).
• Memory bank (p. ??)
• Memory name (p. ??)
• Tuning step (p. ??)
• Call sign squelch or Digital code squelch* (p. ??)
• Your call sign* (p. ??)
• RPT1/RPT2 call sign* (p. ??)
*Available for B band operation only.
64

I Selecting a memory channel

D D Using [DIAL]— Programmed channels
qPush [MR/S.MW] to select memory mode.
wRotate [DIAL] to select the desired memory channel.
• Only programmed channels are displayed.
[DIAL]
FM FM
146 010
A
D D Using [DIAL]— All channels
qPush [MR/S.MW] to select memory mode.
wPush and hold [MR/S.MW] for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
• "µ µ
" indicator blinks.
eRotate [DIAL] to select the desired memory channel.
• All channels are displayed.
Appears
µ 000 000
Rotate [DIAL] to select
the memory channel.