Programming Memory Channels - Icom IC-iV85 Instruction Manual

■ Programming memory channels

The IC-V85 has a total of 107 memory channels (including 6
scan edges and 1 call channel) for storing often used operat-
ing frequency, repeater settings, etc.
1. Setting frequency
In VFO mode, set the desired operating frequency with other
desired settings, such as repeater and subaudible tone.
2. Selecting a memory channel
➥ Push [FUNC] and [MR] then push
[Y Y ] or [Z Z ] several times to select
the desired memory channel.
• " X " indicator and memory channel
number blink.
3. Writing a memory channel
➥ Push [FUNC], then push and hold
PWR
D
A B C
FUNC CALL MR CLR
TONE BANK
P.BEEP T.SCAN
1
2 3
DUP OPT
SCAN SKIP
4 0
5 6
PRIO SET H/M/L
7 8 9
ENT
QUICK REFERENCE GUIDE
[MR] for 1 sec. to program.
• 3 beeps sound.
• Continue to push and hold [MR] for 1 sec. after 3 beeps are emit-
ted, to increment the displayed memory channel number.
PWR
A B C D
FUNC CLR
CALL MR
TONE P.BEEP T.SCAN BANK
1 2 3
DUP OPT
SCAN SKIP
4 0
5 6
PRIO
SET H/M/L
7
8 9 ENT
VI