Setting The Vox Function - Icom F2000D 01 Operating Manual

5
USER SETTINGS

Setting the VOX function

The VOX function can be turned ON or OFF. The VOX
function automatically switches between receive and
transmit during voice operation.
NOTE:
You should turn ON the Beep function (p. 5-2)
before you start setting the VOX function.
1) Rotate [VOL] to turn OFF the transceiver power.
2) Set [ROTARY SELECTOR] to any channel other
than Channel 16.
3) While holding down [PTT] and [Upper], rotate
[VOL] to turn ON the power, to turn the VOX
function ON or OFF.
• W hen the VOX function is ON, a beep sounds.
• W hen the VOX function is OFF, two beeps sound.
4) Rotate [VOL] to turn OFF the power, then turn ON
again to restart the normal operation.
[ROTARY SELECTOR]
[PTT]
[Upper]
[Lower]
5-7
[VOL]