Using The Vox Function; D Turning On The Vox Function; D Setting The Vox Level; D Vox-Related Settings - Icom IC-T10 Advanced Manual

6
OTHER FUNCTIONS

Using the VOX function

The Voice Operated eXchange (VOX) function toggles
the transceiver between transmit and receive by your
voice. This function provides hands-free operation.
You can use the VOX function with the optional
HS-94LWP or HS-95LWP.
NOTE: BE SURE to turn OFF the transceiver when
plugging or unplugging the headset into or from the
[SP] jack.

D Turning ON the VOX function

1. Push [SET] to enter the Set mode.
• A Set mode item is displayed.
2. Repeatedly push [SET] to select "VOX."
3. Rotate [DIAL] to select "On."
4. Push [V/M/C] to exit the Set mode.
• "VOX" is displayed when an optional headset is
attached to the transceiver.
Connection （IC-T10）
2.5 (d) mm
3.5 (d) mm

D Setting the VOX level

1. Push [SET] to enter the Set mode.
• A Set mode item is displayed.
2. Repeatedly push [SET] to select "VOX LV."
3. While speaking into the headset, rotate [DIAL] to
adjust the VOX level.
• "VOX" is displayed when the TX level audio is input.
L Adjust until "VOX" is continuously displayed.
L Higher values make the VOX function more sensitive
to your voice.
4. Push [V/M/C] to exit the Set mode.

D VOX-related settings

Adjust the VOX-related settings in the Set mode.
See page 5-5 for details.
6-9
MIC GND
+5 V
SP
SP GND
I/O
GND
MIC
+5 V
GND
SP
I/O