The Disc Title - Aiwa XR-H33MD Operating Instructions Manual

You can register the titles of the discs and tracks according to
the CD which you made the recording from. Personal messages
also can be registered.
—m— ---
—,~~m
REGISTERING THE DISC TITLE
1
4
3,6
2,4
4
&
1 Press MD and insert an MD to register the titles.
2 Press MODE in stop mode.
"Disc Title?" is displayed for 10 seconds.
... .:, ,,., ,,,.
3 Within 10 seconds, press ENTER.
The unit turns into character entry mode.
4 Enter a letter, number or symbol.
(1) Press MODE repeatedly to select the kind of character
(capital letters, small letters or numbers symbols).
Capital letters (A) ~Small letters (a) ~Numbers/symbols (0) 1
While "TOC EDIT" is displayed, do not disconnect the AC cord
or shake the unit. Otherwise, the TOC data is not recorded
properly and the edited contents on a disc can not be played.
A disc can not be edited:
- when a prerecorded disc is inserted. ("PB Disc" is displayed.)
- when the record-protect tab on an inserted disc is moved to
the protected position. ("Protected" is displayed.)
- during random play or programmed play.
25
ENGLISH
(2) Turn MULTI JOG to select a desired character.
(3) Press > after you have selected a character.
The selected character stops flashing and moves to the
left.
5 Repeat step 4 to enter all the characters (up to 50
characters).
6 Press ENTER.
When 4 EJECT is pressed to eject a disc, "TOC EDIT" is
displayed and the data concerning the contents of the editing
are registered.
REGISTERING THE TRA"CK TITLES
7
2
3
4
3,6—)
'2
Press MD and insert an MD to register the titles.
Press numbered buttons O-9 and +10 on the
remote control, or turn MULTI JOG to select a
track to register the titles. Then, press MODE.
"Title?" is displayed for 10 seconds.
Within 10 seconds, press ENTER.
The unit turns into character entry mode.
Enter a letter, number or symbol.
(1) Press MODE repeatedly to select the kind of character
(capital letters, small letters or numbersLsymbols).
(2) Turn MULTI JOG to select a desired character.
(3) Press - after you have selected a character.
The selected character stops flashing and moves to the
left.