Aiwa XR-H33MD Operating Instructions Manual page 16

This section explains how to record from the tuner, CD player,
MD player or external equipment.
n
MULTI JOG
MODE
.
1-
ENTER
Preparation
Use Type I (normal) tapes only.
Set the tape to the point where recording will start,
1
2
3
Insert the tape,to be recorded on into deck 2.
Insert the tape with the side to be recorded on facing out
from the unit.
AEJE13T
Select the reverse mode.
(1) Press MODE once.
"DECK 2 MODE?" is displayed.
(2) Within 10 seconds, press ENTER, then turn MULTI JOG
to select the reverse mode.
To record on one side only, select "Z".
To record on both sides, select "=)" or "CZ)".
(3) Within 10 seconds, press ENTER again.
Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press CD and load the CD(s). Then,
select an track to be recorded first with +, - or MULTI
JOG.
To record from an MD, press MD and insert an MD. Then,
select a track to be recorded first with -, * or MULTI
JOG.
To record from a radio broadcast, press TUNER and tune
in a station.
To record from a connected source;
To record from a source of equipment connected to DIGITAL
IN terminal on the rear, press ALDUD-IN repeatedly until "D-
IN" appears on the display.
To record from a source of equipment connected to AUX IN
terminal on the rear, press AUX/D-lN repeatedly until "AUX
appears on the display.
4 Press TAPE REC/REC MUTE to start recording.
When the selected function is CD or MD, playback and
recording start simultaneously.
To stop recording, press .
To pause recording, press 11. (Applicable when the source is
TUNER or AUX/D-lN) To resume recording, press again.
INSERTING BLANK SPACES
4-second blank spaces can be inserted at the desired point during
recording. (Applicable when the source is TUNER or AUX/D-
IN.)
1
2
Press TAPE REC/REC MUTE during recording or while
in recording pause mode.
"TAPE ~" on the display flashes for 4 seconds and the
tape runs without recording. After 4 seconds, the deck enters
the recording pause mode.
Press 1I to resume recording.
To insert a blank space of less than 4 seconds, press
TAPE REC/REC MUTE again while "TAPE ~" is flashing.
To insert blank spaces of more than 4 seconds, after the deck
enters recording pause mode, press TAPE REC/REC MUTE
again. Each time the button is pressed, a 4-second blank space
is added.
To erase a recording
1
2
3
Insert the tape to be erased into deck 2 and press TAPE DECK
1/2 to display "TAPE 2".
Set the tape to the point where the erasure is to be started.
Press TAPE REC/REC MUTE to start the erasure.
15
ENGLISH