Digital-In - Aiwa XR-H33MD Operating Instructions Manual

ONS
000
000
1
000
2
000
000
The unit can be turned off automatically at a specified time.
Use the remote control.
1
Press SLEEP while pressing SHIFT.
2 Within 4 seconds, press + or - to specify
the time until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
SLEEP
Specified time
To check the time remaining until the power is turned off
Press SLEEP once while pressing SHIFT. The remaining time
is displayed for 4 seconds.
To
cancel the sleep timer
Press SLEEP twice while pressing SHIFT so that "SLEEP on
the display disappears.
r
L)
~ {–
I
qi
DIGITAL IN
(OPTICAL)
CD DIGITAL
(OPTICAL)
I
-,
~ VIDEO/AUX
~
M
OUT
Refer to the operating instructions of the connected equipment
for details.
The connecting cords are not supplied. Obtain the necessary
connecting cords.
Consult your local Aiwa dealer for optional equipment.
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to CD DIGITAL OUT
(OPTICAL) jack.
When CD DIGITAL OUT (OPTICAL) jack
is not being used
Attach the supplied dust cap.
31
ENGLISH