Aiwa XR-H33MD Operating Instructions Manual page 12

Md/cd stereo system
Hide thumbs Also See for XR-H33MD:
Table of Contents

Advertisement

Available languages

Available languages

Press CD, then press A OPEN/CLOSE
to open the disc
compartment.
Load disc(s) with the label side up.
To play one or two discs, place the discs on tray 1 and
2.
To play three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
Tray 1
DISC CHANG
Trav number of the
Total number
dis; to be played
of tracks
Total playing time
Load discs.
To play all discs in the disc compartment,
press +-.
Play begins with the disc on tray 1.
Number of track
being played
Elapsed playing time
To play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press
.
To pause play, press II. To resume play, press again.
To search for a particular
point during playback,
keep ~
or >
pressed and release it at the desired point.
To skip to the beginning
of a track,
press 4
or ~
repeatedly or turn MULTI JOG until the desired track is displayed.
To remove discs, press 4 OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on.
To check the remaining time
During play, press EDIT/CHECK on the remote control while
pressing SHIFT. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY
1-3
to select a disc.
Press numbered buttons O-9, and +1O to select a track.
Example:
To select the 25th track, press +1O &.I& and 5,
To select the 10th track, press +1O and O.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press = OPEN/CLOSE to close the disc compartment.
When loading an 8-cm (3-inch) disc, put it on the inner circle of
the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions.
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
1 I
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents