Aiwa XR-H33MD Operating Instructions Manual page 11

Ill
4
~!
3
)
After playback on one deck finishes, the tape in the other deck
will start to play without interruption.
Insert tapes into deck 1 and deck 2.
Press TAPE DECK1/2 to select the deck to be
played back first.
Set the reverse mode to "Z)".
1
2
3
Press MODE once.
"DECK 2 MODE?" is displayed.
JA!ithin 10 seconds, press ENTER, then select "Z)" with
MIULTI JOG.
Ufithin 10 seconds, press ENTER again.
—
About cassette tapes
To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
e
Side A
Q
"0 O;Q
\ <Q>
4
Tab for side A
1P
To record on the tape again, cover the tab openings with
adhesive tape, etc.
120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the
mechanism.
—
Press +- to start playback.
Playback continues until is pressed.
ENGLISH
10