Aiwa XR-H33MD Operating Instructions Manual page 33

This unit can input digital sound signals through this jack. Use
an optical cable to connect digital audio equipment,
This unit has a sampling frequency rate converter and it enables
you 10 record from a equipment whose sampling frequency is
different from MD, such as a BS/CS tuner, DAT recorder, or etc.
Remove the dust cap @from DIGITAL IN (OPTICAL) jack. Then,
connect an optical cable plug to DIGITAL IN (OPTICAL) jack.
%.
)
~J -;
I
_._— ——
,.
-""-~-
*,D*
When DIGITAL IN (OPTICAL) jack is not being used
Attach the supplied dust cap.
TO PLAY EQUIPMENT CONNECTED TO
THE VIDEO/AllX JACKS
1 Press AUX/D-lN repeatedly until "AUX" appears
on the display.
2 Play the connected equipment.
To change a source name in the display
When AUX/D-lN is pressed, "AUX is displayed initially. It can
be changed to "VIDEO" or "TV.
With the power on, press POWER while pressing AUXID-IN.
Repeat the procedure to select one of the names.
TO "PLAY E'Q-tilP'ME'Nf-'; ON'NECT'ED-TO
THE DIGITAL IN
JACK
1 Press AUWD-IN repeatedly until "D-IN" appears
on the display.
2 Play the connected equipment.
ENGLISH
32