Aiwa XR-H33MD Operating Instructions Manual page 37

Me:wage Cause Solution
Blank Disc Nothing is recorded on the disc.
——
Can'1 Edit The disc is record-protected.
Tracks are too short to be joined.
The combine function was used while playing back
the first track.
The divide function was used at the beginning of
the track.
The combine function was used to join a track
recorded in monaural with a track recorded in
stereo.
Programmed play or random play is activated.
——
Disc Error
The disc is damaged by scratches.
The unit received a strong shock during a TOC
reading.
Disc Full
There is not enough time remaining on the disc to
record
——
Temp Over
The temperature of the unit is too high.
The surrounding temperature is too high or too low.
——
Emergency
The unit operates abnormally due to a scratched
disc or a strong shock.
——
PB Disc There is an attempt to record or edit a prerecorded
music disc (optical disc).
Protected The disc is record-protected.
TOC
Full
There are too many tracks or emphasis data to be
recorded or edited, or there is no room on the disc.
..—
Mecha Error
Error occurs in the loading mechanism.
(All functions except the POWER will be disabled.)
Can'1 Copy Dubbing is prohibited by the SCMS standard.
No Signal The digital connecting cord (optical) is not plugged
in properly.
——
MD Error
A trouble occurs in the MD unit.
——
IJTOC Error TOC data is not registered correctly due to a strong
shock.
Slide the record-protect tab on the disc, (See page
22.)
See "THE LIMITATIONS C)F MD on page 24.
Disabled.
Cancel the programmed play or random play. .—
Replace the disc.
Do not subject the disc to strong shock during aTOC
readina.
Replace the disc with another recordable disc.
Leave the unit in a cool place for a while before
operating it again.
Operate the unit at moderate room temperature.
Replace the disc. Do not subject the disc to a strong
shock.
Replace the disc with a recordable one.
Slide the record-protect tab on the disc. (See page
22.)
Erase tracks.
Turn the power off and disconnect the AC cord once.
Then turn it on again.
If this message still appears, consult your local Aiwa
dealer.
Plug it in properly.
Refer ta vour local Aiwa dealer.
All the functions except "ERASING ALL TFiACKS"
function (page 28) cannot be performed.
Replace the disc. Do not subject the disc to a strong
shock during TOC reading or TOC recording,
ENGLISH
36