Specifications; General Specifications; Characteristics - Omron CPM2C Operation Manual

Specifications

2-1

Specifications

2-1-1

General Specifications

Item
Supply voltage
Operating voltage range
Power consumption
Inrush current
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient temperature
Humidity
Atmosphere
Power interrupt time
2-1-2

Characteristics

Item
Control method
I/O control method
36
CPU Units with 10/20 I/O points
Relay Transistor outputs
outputs
24 VDC
20.4 to 26.4 VDC
CPM2C-10C@DR-@: 4 W
CPM2C-10C@DT@C-D: 3 W
CPM2C-10C@DT@M-D: 3 W
CPM2C-20C@DR-@: 4 W
CPM2C-20C@DT@C-D: 3 W
CPM2C-20C@DT@M-D: 3 W
CPM2C-32CDT@C-D: 3 W
CPM2C-32CDT@M-D: 3 W
Note The above values for CPU Unit power consump-
tion include the power consumption for Program-
ming Consoles and Communications Adapter
Units (CIF@@).
25 A max.
20 MΩ min. (at 500 VDC) between insulated circuits
2,300 VAC for 1 min (between insulated circuits)
Conforms to IEC61000-4-4; 2 kV (power lines)
10 to 57 Hz, 0.075-mm double amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
directions for 80 minutes each (Time coefficient; 8 minutes × coefficient factor 10 = total time
80 minutes)
2
147 m/s three times each in X, Y, and Z directions
Operating: 0 to 55°C
Storage: –20 to 75°C (except for the battery)
10% to 90% (with no condensation)
Must be free from corrosive gas
2 ms min.
10 I/O points
(relay/transistor outputs)
Stored program method
Cyclic scan with direct output (Immediate refreshing can be performed with IORF(97).)
CPU Units with
32 I/O points
transistor
outputs
CPM2C-10EDR:
CPM2C-20EDR:
CPM2C-8ER:
CPM2C-24EDTC:
CPM2C-24EDT1C: 1 W
CPM2C-32EDTC:
CPM2C-32EDT1C: 1 W
CPM2C-8EDC:
CPM2C-16EDC:
CPM2C-8ETC:
CPM2C-8ET1C:
CPM2C-16ETC:
CPM2C-16ET1C:
CPM2C-24EDTM:
CPM2C-24EDT1M: 1 W
CPM2C-32EDTM:
CPM2C-32EDT1M: 1 W
CPM2C-8EDM:
CPM2C-16EDM:
CPM2C-8ETM:
CPM2C-8ET1M:
CPM2C-16ETM:
CPM2C-16ET1M:
CPM2C-MAD11:
CPM2C-TS001:
CPM2C-TS101:
CPM2C-SRT21:
CPM2C-CIF21:
CPU Unit Specification
20 I/O points
(relay/transistor outputs)
Section 2-1
Expansion I/O Units and
Expansion Units
1 W
2 W
2 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
1 W
3.5 W
1.5 W
1.5 W
1 W
1 W
2
in X, Y, and Z
32 I/O points
(transistor outputs)