Omron CPM2C Operation Manual page 8

About this Manual:
The CPM2C is a compact, high-speed Programmable Controller (PC) designed for control operations
in systems requiring from 10 to 120 I/O points per PC. There are two manuals describing the setup and
operation of the CPM2C: The CPM2C Operation Manual (this manual) and the CPM1/CPM1A/
CPM2A/CPM2C/SRM1(-V2) Programming Manual (W353). (The CPM1/CPM1A/CPM2A/CPM2C/
SRM1(-V2) Programming Manual is referred to as simply the Programming Manual in this manual.)
This manual describes the system configuration and installation of the CPM2C and provides a basic
explanation of operating procedures for the Programming Consoles.
The Programming Manual (W353) provides detailed descriptions of the CPM2C's programming func-
tions. The CX-Programmer Operation Manual (W437) provides details of operations for the WS02-
CXPC1-E CX-Programmer.
Please read this manual carefully and be sure you understand the information provided before
attempting to install and operate the CPM2C.
Section 1 gives a brief overview of the steps involved in developing of a CPM2C System, describes
the possible system configurations, and describes the CPM2C's special features and functions.
Section 2 provides the technical specifications of the Units that go together to create a CPM2C PC
and describes the main components of the Units.
Section 3 describes how to install and wire a CPM2C PC.
Section 4 describes how to connect the Programming Console, and how to perform the various pro-
gramming operations.
Section 5 describes how to perform a test run and how to diagnose and correct the hardware and soft-
ware errors that can occur during PC operation.
Section 6 describes how to use the CPM1-EMU01-V1 Expansion Memory Unit.
Section 7 describes the features and functions of the CPM2C-CIF21 Simple Communications Unit,
the settings required to use the Unit, and an example application. DM Settings Assignment Sheets are
provided in Appendix C to record data settings.
Appendix A provides tables of CPM2C Units and related products.
Appendix B provides the dimensions of CPM2C Units.
Appendix C provides DM setting assignment sheets for use with the CPM2C-CIF21 Simple Communi-
cations Unit.
Appendix D describes SYSMAC and SYSMAC-CPT Support Software capabilities and how to con-
nect the CPM2C to the personal computer with this Support Software installed.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
ix