Uploading Programs - Omron CPM2C Operation Manual

Handling
Disconnecting
6-3-3

Uploading Programs

Expansion Memory Unit
EEPROM
Indicator
UPLOAD+DM Button
216
Data bits: 7
Stop bits: 2
Parity: Even
Baud rate: 9,600 bps
Press the levers on the top and bottom of the connector inwards to unlock the
connector and pull out as shown in the following diagram.
Note Do not attempt to remove the connector by pulling the cable.
Ladder programs and the contents of data memory can be uploaded to the
EEPROM using the following procedure. The buttons used will determine
whether the contents of data memory are uploaded or not.
UPLOAD Button
Button
Ladder program and
expansion instructions
DM6144 to 6655
Note Use a Phillips screwdriver or other tool with a diameter of 3.0 mm max. and a
blade length of 10 mm min. to press the upload button.
CPM2C-CN111
CS1W-CN114
CPM2C-CIF01-V1
UPLOAD + DM
Read from PC to
EEPROM.
Section 6-3
CPM2C
CPM2C
UPLOAD
Read from PC to
EEPROM.
Not affected.