Omron CPM2C Operation Manual page 120

Wiring and Connections
MIL Connectors
Compatible MIL Connector Specifications (OMRON)
2. After soldering all of the pins, slide the heat-shrink tubing over the soldered
power supply pins and shrink the tubing by heating it with a heat gun.
3. Assemble the socket and connector as shown in the following diagram.
Connector cover
The following tables provide specifications of compatible I/O connectors.
Polarity slots
(notches)
MIL Flat Cable Connectors
Name
Socket
Strain Relief
Set model number
Recommended Flat Cable
Note The rated current for the flat cable is 1 A max. Do not allow the common termi-
nal current to exceed 1 A.
Heat-shrink tubing
Small screws (3)
Socket
Nuts (3)
Strain Relief
Socket
XG4M-2030
XG4T-2004
XG4M-2030-T
XY3A-200@
Section 3-4
Small screws (2)
Cable clamp
Connector screws
Nuts (2)
I/O connectors
Set
Model
97