Omron CPM2C Operation Manual page 119

Wiring and Connections
Connecting I/O
Connectors
(Soldered Connectors)
1,2,3...
Assembling Soldered
Connectors
1,2,3...
96
2. Use a flat-blade screwdriver to tighten the connector's fastening screws.
Flat-blade screwdriver
Use the following procedure when connecting a soldered connector.
1. Align the connector and insert it into the Unit.
2. Use a Phillips screwdriver to tighten the connector's fastening screws.
Use the following procedure when wiring and assembling a soldered connec-
tor (OMRON C500-CE241).
1. Slide heat-shrink tubing over the power supply wires and solder the wires
to the appropriate pins on the socket.
Phillips screwdriver
Heat-shrink tubing
Power supply wires
Connector
Section 3-4