Technical Data - Graco 240209 Instructions-Parts List Manual

Heavy-duty stainless steel drum agitator
Table of Contents

Advertisement

Maximum air input pressure . . . . . . . . . 100 psi (7 bar)
Motor power rating at 1200 rpm (shaft at 50 rpm),
using 12 cfm (0.34 m3/min) . . . . . . . 0.25 hp (186 W)
Maximum recommended shaft rpm . . . . . . . . . . . . . 100
Gear reducer ratio . . . . . . . . . . . . . . . . . . . . . . . . . 24:1
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . .25.8 lb (11.7 kg)
Height
From top of air motor to end of agitator
shaft (no nut) . . . . . . . . . . . . . . . . . . 38 in. (965 mm)
From top of air motor to end of siphon
tube (no fittings) . . . . . . . . . . . . . . 43 in. (1092 mm)
Span of agitator blades . . . . . . . . . . . . . 20 in. (508 mm)
Width of agitator blades . . . . . . . . . . . . . . 3 in. (76 mm)
Air inlet . . . . . Mates with 1/4-in. npt(f) quick-disconnect,
Wetted parts . . . . . . . . . . . . . 304 SST, 304/304L SST,
Siphon tube I.D. . . . . . . . . . . . . . . . . . . . 3/4 in. (19 mm)
Maximum flow at 100 cps . . . . . . . . . 12 gpm (45.5 lpm)
Maximum flow at 1000 cps . . . . . . . 1.2 gpm (4.5 lpm)
Air consumption . . . 3 to 30 scfm (0.08 to 0.85 m3/min)
* Sound data
† Typical operating conditions
Sound power . . . . . . . . . . . . . . . . . 77.3 dB(A)
Sound pressure . . . . . . . . . . . . . . . 63.8 dB(A)
‡ Maximum noise conditions
Sound power . . . . . . . . . . . . . . . . . 86,4 dB(A)
Sound pressure . . . . . . . . . . . . . . . 72,9 dB(A)

Technical Data

Part No. 208536
acetal, A/F, nylon, PTFE
Reference Information
Maximum storage time
(varies with conditions). . . . . . . . . . . . . . . . . 10 years
Maximum lifetime (varies with operating conditions
and maintenance) . . . . . . . . . . . . . . . . . . . .10 years
Power Efficiency Factor
(varies based on configuration, operating parameters,
and material) . . . . . . . . . . . 0.1 HP/SCFM air consumed
* Sound data was measured per ISO 3744-1981.
† 50 rpm (shaft) agitating 300 cps water-base material
‡ 100 rpm (shaft) agitating an empty container
®
Gast
is a registered trademark of Gast Manufacturing.
®
Inhibisol
is a registered trademark of Penetone Corp.
(2.7 W/Liter air consumed)
with motor at 500 rpm
308609 19

Advertisement

Table of Contents
loading

Table of Contents